KEY FEATURES & BENEFITS OF THE SX Clear & SX Satin, and SX Matte

Exceptional Bonding Capabilities – No primers needed; direct to most surfaces, including ferrous and non-ferrous metals without destructive surface preparation.

Types of Surfaces – Concrete, stained concrete, carbon steel, aluminum, galvanized metal, stainless steel, fiberglass, wood, clay/masonry surfaces, stone, hardwood, terrazzo, vinyl composition tile (VCT), vinyl sheeting, ceramic and other tile and grout surfaces with the addition of adhesion plus

Permeability – 2.43 Perms – Water barrier, not vapor barrier; allows water vapors to migrate through the coating into the atmosphere

Ultraviolet Insensitivity – No clear coat needed for better UV protection

Low to Zero VOCs – The volatile organic compounds (VOCs) are Less than 30 grams/liter.

Virtually Odorless – Does not require special breathing apparatus/respirators and does not emit any free monomers after parts A & B are mixed

Produced in Total Water – Does not use solvents, exempt solvents or any co-solvent

Thermal Stability – Has a high coefficient of linear expansion.

Does Not Contain Proposition 65 Chemicals – These chemicals are known to the state of California to cause cancer and birth defects.

For Interior or Exterior Use – Allows for a high-performance urethane to be used indoors while the building is in operation

Meets U.S. Building Councils’ LEED Criteria – Under EQ 4.2 for Low-emitting paints and coatings

Flame Spread – (ASTM 84); Result = 10, which is Class A/ Type I (0-25 Flame Spread Index)

Smoke Developed – (ASTM 98); Result = 5, which is Class A / Type I (0-450 Smoke Developed Index)

For Vertical or Horizontal Surfaces

Increased Co-Efficient of Friction – Products certified by the National Floor Safety Institute as High Traction with a wet coefficient of friction rating greater than 0.60

Provides Anti-Graffiti Properties – Paint, spray paint and makers can be removed without damaging the coating

Inherent Dry Erase Characteristics – Can turn entire walls or tables into dry-erase boards without ghosting / shadowing

Brush, Roll, or Spray Application

Very Repairable – Small sections can be repaired without noticing or redoing the entire section

ENERGY STAR Qualified & Cool Roof Rated Product – Tested for 3 years at 3 different weather farms (FL, OH and AZ) and sent to UL for evaluation of the solar reflectance (Initial 0.83 and Aged 0.78) and thermal emittance (Initial 0.91 and Aged 0.85).